Maison Margiela MM6 Digital T-Shirt Review: Collar Rib, Hem Stitch and the Size to Actually Order

MM6 has produced a long run of graphic tees, and most of them live or die on two details: how cleanly the print sits on the cotton, and whether a loose cut is loose in the places you actually want. We ordered this number-print tee through a shopping agent to check both, plus the collar rib and hem stitching, which is where a sub-$25 graphic tee usually gives itself away.

The listing we bought is SKU 7702011309, priced at $22.09 against a $25.39 original, offered in black and white in sizes S through XL. It is described as combed cotton at 250–300 g/m², short sleeve, loose fit, with a printed letter motif and a 2024 summer release.

What our testing team checked at the bench

Our sample arrived in black, size L, sealed in a plain poly bag inside the agent's outer packaging. We photographed the parcel before opening, then worked through the same route we use for every apparel order: a steel tape for flat measurements, calipers for the collar rib depth and print margins, a calibrated scale for swatches taken from the inside hem allowance, and a 10x macro setup for the print and seam photography. Fabric weight is logged in grams per square metre, and the shirt was washed three times at 30 °C and re-measured afterwards.

Collar rib, hem and seams

The collar is the first part of a cheap graphic tee to fail, so we photographed it at 10x before washing. The rib on our sample measured about 2.5 cm deep and sat flat against the neck without a wavy edge or a visible stitch ridge through the front. The back neck was finished cleanly enough that nothing was catching on the wearer's skin.

The hem runs a double-needle stitch at roughly 8 stitches per inch; the side seams sit closer to 10. Thread tension was even along the whole hem, with no skipped stitches or puckering where the fabric bunches slightly at the side. Sleeve hems matched the body hem in construction.

None of this is couture-level finishing, and we would not pretend otherwise. It is simply tidy, which is more than the price bracket usually delivers.

The number print at 10x

Under magnification the digits were sharply registered: no haloing around the edges, no ink bleeding into the cotton grain, and the brand lettering beneath the rows carried the same definition. The one flaw worth noting is a slight fill in the counters of the smallest digits on our sample, where two tight curves close up a little more than on the larger rows. It is invisible at arm's length and does not read as a defect in wear.

Print thickness measured roughly 0.1 mm above the fabric surface, which is what a well-cured plastisol-type print should look like. Nothing flaked or lifted at the fold lines after three washes.

Fabric weight and hand feel

The listed 250–300 g/m² range is midweight rather than thin jersey, and our two hem swatches came in at 269 g/m² on average — inside the claim, with a little variation between the two cuts. In the hand that translates to a cotton that holds its shape on a hanger, resists see-through under indoor light and still moves easily.

After three 30 °C washes, inside out and air dried, the body lost about 1.0 cm in length and 0.5 cm across the chest. That is normal for combed cotton and worth factoring in if you are between lengths. The print showed no cracking, lifting or colour shift at 10x.

Flat measurements from our size L sample

These numbers come from a single shirt. We did not have the seller's published S–XL chart attached to the order, so we cannot confirm that our size L matches what the listing calls a large — only that this is what arrived. A 57 cm flat chest and a 48 cm shoulder on a large confirms the loose brief; it does not tell you which size you are.

Sizing: three buyer accounts, three answers

What we could find publicly describes other Margiela tops rather than this shirt, and it does not agree with itself.

"Get a size small if you're 5'8" and have a slim build. Preme shirts fit oversized now. Especially in the torso." — buyer in the r/supremedrops thread on a Supreme x MM6 tee

That advice points one way. A separate buyer on r/MaisonMargiela went the other way entirely, reporting that their true size was too narrow while one size up was too long, and that the cut read as wider and more comfortable rather than fitted. A third thread is useful only for translation: a "40" in Margiela numeric sizing corresponds roughly to a Medium.

So the honest position is that the tape supports a loose cut, and the community evidence does not settle your size. One message to the seller asking for the chest and length of the exact size you are considering settles it in minutes.

Price against what arrived

At $22.09 the tee sits well below what a comparable midweight combed-cotton graphic costs on the high street, and nothing in our inspection looked like a corner cut: even print registration, a flat rib, a straight hem, stable colour after three washes. The uncertainty is concentrated in one place — the size you receive — and that is a problem a tape measure solves rather than a reason to avoid the shirt.

How to order it

1. Ask the seller for the flat chest and body length of the size you want, in centimetres.
2. Measure a tee you already like and compare numbers, not labels.
3. If you are comparing against Margiela numeric listings, treat 40 as roughly a Medium.
4. Allow about 1 cm of length after the first washes, and dry flat or hang rather than tumble.
5. If you are slim built, consider one size down — but only after the seller's numbers come back.